Chevrolet S-10 Key Replacement
Lost or need a spare key for your Chevrolet S-10? Our mobile locksmith cuts and programs it at your location in Las Vegas — no dealer tow, no after-hours surcharge, firm price before any work starts.
Replacing the key for a Chevrolet S-10 costs about $210 all-in with Rhinox — cut and programmed at your vehicle, usually in 20–30 minutes. No dealer tow and no after-hours surcharge. Las Vegas 24/7 — call (702) 356-0352.
The 1998–2005 Chevrolet S10 uses a Plastic Head Key paired with a Keyless Entry Remote — a straightforward combo, but losing both means a full relearn is required on-site. Our Las Vegas mobile team carries all 3 stocked variants of the S10 remote (FCC IDs KOBLEAR1XT and KOBUT1BT, both at 315 MHz) so we can cut, program, and hand you working keys without a dealer tow.
Keys that fit your Chevrolet S-10
Match your key to the photos — the FCC number is printed on the back. We program the exact one on-site.
Keyless Entry Remote3-button · 2001–2004FCC: KOBLEAR1XT
Keyless Entry Remote3-button · 1998–2002FCC: KOBUT1BT
Plastic Head Keyno buttons · 1999–2005Key replacement by year
Which Key and Remote Does the 1998–2005 S10 Use?
Your S10 takes a Plastic Head Key for ignition and door locks, plus a 3-button Keyless Entry Remote operating at 315 MHz. The two confirmed FCC IDs for this truck are KOBLEAR1XT and KOBUT1BT — if your remote shell is cracked or the buttons are dead, cross-referencing the FCC ID printed inside the battery compartment confirms the exact replacement needed. We stock 3 distinct key variants for this model, so compatibility is confirmed before we roll. For more on remote programming specific to GM trucks, see our key fob programming page.
What Happens If You Lose All S10 Keys?
A total key loss on a 1998–2005 S10 means we must decode the lock cylinder or VIN-trace the original key cut, then program the new remote to the truck's receiver on-site — no dealer visit or tow required. The S10 of this era does not use a transponder chip in the ignition key itself, which actually simplifies the cut-and-go process compared to later GM models. Our Las Vegas mobile unit arrives with the cutting equipment and programming tools to handle a zero-key situation in one visit. If you are currently locked out while dealing with this, our car lockout service runs 24/7.
What Affects the Price and How to Get It Done Fast in Las Vegas
The installed price shown above covers cutting, programming, and labor — the all-in number, not just a parts quote. Variables that can shift your total include needing a replacement remote shell versus just a recut key blade, your location across the Las Vegas valley, and whether you need one key or a spare set (a second key cut same-visit costs less per unit). The fastest path is calling our 24-hour Las Vegas locksmith line directly; we confirm your S10 year and trim, verify the correct FCC variant, and dispatch a tech — typical arrival is under 30 minutes. You can also verify OEM-style remote options for reference at AutoZone's S10 keyless transmitter listing, though our mobile service beats retail on total cost once you factor in programming.
Chevrolet S-10 key questions
How much does a 1998–2005 Chevrolet S-10 key replacement cost?
A replacement key for a 1998–2005 Chevrolet S-10 typically runs around $210 installed by our mobile technician — cut, programmed, and tested at your location in Las Vegas. The firm price is confirmed on-site before any work starts; there is no after-hours surcharge.
Can you make a Chevrolet S-10 key without the original?
Yes. Even with all keys lost, we can originate a new key for your Chevrolet S-10 by accessing the immobilizer directly — no dealer tow required. It costs a bit more than copying an existing key, so keeping a spare is the cheapest insurance.
Which key does my 1998–2005 Chevrolet S-10 use?
Depending on the exact build, your S-10 uses one of: Keyless Entry Remote, Plastic Head Key. Match your key to the photos above, or send us the FCC number printed on the back and we'll load the right one.
Can I program a replacement S10 remote myself without a locksmith?
Some 1998–2005 S10 remotes support a DIY relearn sequence using the door lock switch, but it only works if you already have one working remote to initiate the cycle. If you have zero programmed remotes or the procedure fails, a mobile locksmith with the right scan tool is the reliable fix. Our Las Vegas techs carry equipment specific to the KOBLEAR1XT and KOBUT1BT FCC variants stocked for this truck.
Does the 1998–2005 Chevrolet S10 ignition key have a transponder chip?
No — the S10 of this generation uses a standard Plastic Head Key without an embedded transponder chip, meaning the ignition does not require electronic programming for the key blade itself. Only the separate Keyless Entry Remote needs to be programmed to the vehicle. This makes key cutting faster and generally less expensive than chip-key vehicles.
How much does it cost to replace a lost S10 key and remote in Las Vegas?
The all-in installed price for your specific S10 year and remote variant is shown above on this page — it includes the key cut, remote, and on-site programming with no hidden trip fees. Our parts for this model start very low, and the remote uses one of two confirmed FCC IDs we keep in stock, so there is no delay sourcing the right unit. Call or book online and a mobile tech comes to you anywhere in the Las Vegas metro.
Get your Chevrolet S-10 key today
A mobile technician comes to you, cuts and programs the key, and confirms the firm price first. Same price day or night.